Roof Spray Foam Removal in Leamington Spa

Roof spray foam removal deals with foam applied directly to the underside of the roof — onto the felt, sarking and rafters. This is the installation type that most often prevents a property being mortgaged, because it seals over the very timbers a surveyor must inspect.

Why it causes survey problems

Foam bonded to the underside of the roof worries a lender on three counts: the timbers cannot be seen, moisture can be trapped behind the foam, and future removal is skilled work that the lender treats as a liability. Clearing the foam and documenting the result answers all three.

What the service includes

• Survey to confirm foam type and roof construction
• Careful stripping of foam from the underside of the roof
• Protection of the roof covering so it stays weather-tight
• Inspection of rafters, purlins and battens once exposed
• Responsible removal of all foam waste
• A written report suitable for lenders and surveyors

What happens on the day

1. Access is set up and the loft protected
2. Foam is removed methodically, section by section
3. The exposed roof structure is checked as work proceeds
4. Any genuine timber issues are photographed and explained
5. The space is cleared and the waste taken away

Local knowledge

Many Warwickshire roofs are traditional cut-timber construction rather than modern trusses, so foam sits directly against those rafters. Because these roofs weigh heavily at valuation, getting the timbers visible and reported on is usually what allows a stalled sale to complete.